Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connection problem with HMI panel

Created by: HekoPakeko at: 12/6/2022 2:07 PM (14 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

12/6/2022 2:07 PM	Rate (0)
HekoPakeko Joined: 12/1/2022 Last visit: 12/19/2022 Posts: 11 Rating: (0)	Hello. I have some problems with one of my HMI panels. When I try to simulate the panel I have no connection to the PLC, I get the alarms 110001 and 140001. I can't find what the problem is and don't know how to fix it. I just added the panel and it only has one PLC tag in it for testing. I have 3 more HMI panels in the projekt and they are woring fine. The PLC can have max 4 HMI panels so there should not be a problem with to many HMI panels. HMI panel: KTP600 Basic color PN, Version 12.0 PLC: CPU 1511-1 PN TIA Portal V17

Suggestion To thank Quote Answer

12/6/2022 5:30 PM	Rate (0)
Madadi Bronze Member Joined: 12/28/2016 Last visit: 1/26/2023 Posts: 268 Rating: (20)	HekoPakeko Hello. I have some problems with one of my HMI panels. When I try to simulate the panel I have no connection to the PLC, I get the alarms 110001 and 140001. I can't find what the problem is and don't know how to fix it. I just added the panel and it only has one PLC tag in it for testing. I have 3 more HMI panels in the projekt and they are woring fine. The PLC can have max 4 HMI panels so there should not be a problem with to many HMI panels. HMI panel: KTP600 Basic color PN, Version 12.0 PLC: CPU 1511-1 PN TIA Portal V17 Hi Did you download the program on the panel or just test in simulation mode? You can send the error image. Does the error occur after downloading or before?
	https://pnap.ir If this Information really helps, you could use the Rate function😉
Suggestion To thank Quote Answer

12/7/2022 7:01 AM	Rate (0)
HekoPakeko Joined: 12/1/2022 Last visit: 12/19/2022 Posts: 11 Rating: (0)	Hello I'm using the RT Simulator. I don't have the HMI panel her so can't test on it. The error occur anytime that I start the simulation. Error: 110001 - Change to operating mode 'online'. 140001 - Connection disconnected: %1, Station %2, Rack %3, Slot %4. Attachment Skärmbild 2022-12-07 075556.png (13 Downloads)
	Last edited by: HekoPakeko at: 12/07/2022 07:05:02
Suggestion To thank Quote Answer

12/7/2022 7:15 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/27/2023 Posts: 21197 Rating: (2797)	you must set PG/PC Interface correct int the Windows Control panel

Suggestion To thank Quote Answer

12/7/2022 7:41 AM	Rate (0)
qwazee Platinum Member Joined: 3/30/2020 Last visit: 1/27/2023 Posts: 3036 Rating: (695)	Perhaps have a look at these articles: Which settings are necessary to establish a connection between a simulated S7-1500 and a simulated WinCC Runtime Advanced or a simulated HMI operator panel? Testing and simulating HMI projects (TIA Portal) in conjunction with SIMATIC controllers, PLCSIM and PLCSIM Advanced

Suggestion To thank Quote Answer

12/7/2022 8:47 AM	Rate (0)
HekoPakeko Joined: 12/1/2022 Last visit: 12/19/2022 Posts: 11 Rating: (0)	ChristophD you must set PG/PC Interface correct int the Windows Control panel The PG/PC is set right. the other HMI panels work.

Suggestion To thank Quote Answer

12/7/2022 8:48 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/27/2023 Posts: 21197 Rating: (2797)	an the interface is also correct in the HMI Connection setting?

Suggestion To thank Quote Answer

12/7/2022 9:05 AM	Rate (0)
HekoPakeko Joined: 12/1/2022 Last visit: 12/19/2022 Posts: 11 Rating: (0)	qwazee Perhaps have a look at these articles: Which settings are necessary to establish a connection between a simulated S7-1500 and a simulated WinCC Runtime Advanced or a simulated HMI operator panel? Testing and simulating HMI projects (TIA Portal) in conjunction with SIMATIC controllers, PLCSIM and PLCSIM Advanced I have tried tihs now and it diden't work. Still the same problem

Suggestion To thank Quote Answer

12/7/2022 2:41 PM	Rate (0)
HekoPakeko Joined: 12/1/2022 Last visit: 12/19/2022 Posts: 11 Rating: (0)	ChristophD an the interface is also correct in the HMI Connection setting? Yes.

Suggestion To thank Quote Answer

12/7/2022 2:43 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/27/2023 Posts: 21197 Rating: (2797)	HekoPakeko ChristophD an the interface is also correct in the HMI Connection setting? Yes. screenshot?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on