Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Coonecting S7-200 with PG using MPI cable

Created by: Manoj123 at: 4/25/2015 6:13 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/25/2015 6:13 PM	Rate (0)
Manoj123 Posts: 2 Rating: (0)	Dear, Can i connect S7-200 CPU224XP using MPI cable???? If yes then what communication protocol i have to use..... Regards, Manoj
Manoj123 Posts: 2 Rating: (0)	Last edited by: Manoj123 at: 4/25/2015 6:18:53 PM
Suggestion To thank Quote Answer

4/25/2015 6:56 PM	Rate (0)
Online Tech Platinum Member Joined: 3/28/2015 Last visit: 10/4/2024 Posts: 721 Rating: (213)	Manoj123 Can i connect S7-200 CPU224XP using MPI cable???? If yes then what communication protocol i have to use..... Kindly have a look at this topic: https://support.industry.siemens.com/tf/ww/en/posts/s7-200/80380/?page=0&pageSize=10
	Eng.Mohamed Ibrahim WhatsApp : +201122880543
Suggestion To thank Quote Answer

6/16/2015 8:45 AM	Rate (0)
Dany Min Advanced Member Joined: 10/12/2013 Last visit: 1/8/2022 Posts: 33 Rating: (0)	Hello, Yes,you can connect if you are using PC adaptor USB cable,PG/PC interface must select PPI and if using USB adaptor A2, select at DP. MicroWin V4 SP8 and above should install. But the best way is read the specification of your adaptor before you connect. Cheer! Dany Min

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on