Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP 343-1 Lean Error

Created by: Metal_Kain at: 8/22/2011 2:09 PM (9 Replies)

Rating (0)

Thanks 7

10 Entries

8/22/2011 2:09 PM	Rate (0)
Metal_Kain Posts: 11 Rating: (0)	Hi everybody, First, I have a PC and a CPU 314C-2 DP with a CP 343-1 Lean working on Industrial Ethernet. Now, I have this CPU 312 that I want to connect to the Industrial Ethernet so I connected a new CP 343-1 Lean, I configure the Hardware (CPU 312 + SM331 + SM321 + SM322 + New CP 343-1 Lean), it is compiled with no errors but when I download the configuration both SF led (CPU and CP) turn on and both devices are stopped. Only when I delete de CP from the HW configuration and download it, the CPU goes to Run again. I don't understand what the problem is. Could you help me please. Best regards.
Metal_Kain Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

8/22/2011 2:20 PM	Rate (0)
smiffy Platinum Member Joined: 1/17/2007 Last visit: 10/21/2024 Posts: 1547 Rating: (537)	Have you looked at the diagnostic buffer for the CP and CPU? There is usually information in there that will give you some pointers to what the problem might be.
	Programming today is the race between software engineers building bigger and better idiot proof programs, and the universe producing bigger and better idiots. So far, the universe is winning...
Suggestion To thank Quote Answer

8/23/2011 1:39 AM	Rate (0)
Metal_Kain Posts: 11 Rating: (0)	Hi, Yes, there was an interesting thing I could read the CP bufferusing the ethernet connection but I could not read the CPU buffer. Using a MPI interfase the CPU buffer was read but the CP wasn't. This was very confusing so I tried using a brand new CP but the result was the same; it seemed like there was no connection between the CPU and the CP that's why I tried replacing the black bus connector in the back and ....... eureka!!! .... it started to work. It seemed like a very small issue but I never could imagine the bus connector was defective. Anyway, thanks for the support. I hope this experience can help to anyone with this very confusing trouble I had. Best regards.
Metal_Kain Posts: 11 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users dchartier SolutionFinder Mohamed Ali

5/22/2014 4:24 AM	Rate (0)
Retroman Posts: 6 Rating: (0)	Hello. Are you fix this error for CP 343-1 lean module?
Retroman Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

5/22/2014 9:12 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	Metal_Kain Hi, that's why I tried replacing the black bus connector in the back and ....... eureka!!! .... it started to work. Obviously he did
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users smiffy Ton Verra metwally mustafa

5/23/2014 11:03 AM	Rate (0)
smiffy Platinum Member Joined: 1/17/2007 Last visit: 10/21/2024 Posts: 1547 Rating: (537)	Post has been effectively dead since 23/8/11. Then for some "inexplicable" reason, there is a new post on 22/5/11 that adds very little new insight. Now I wonder why that might have happned. Maybe there is some sort of "event" on at the moment. Nope, can't think of it. It is a mystery
	Programming today is the race between software engineers building bigger and better idiot proof programs, and the universe producing bigger and better idiots. So far, the universe is winning...
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users n00dels

5/26/2014 4:25 AM	Rate (0)
Retroman Posts: 6 Rating: (0)	Hello I have change black bus connector it is same i dont know this error
Retroman Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

5/26/2014 10:36 AM	Rate (0)
n00dels Experienced Member Joined: 4/8/2013 Last visit: 6/30/2024 Posts: 95 Rating: (7)	smiffy Post has been effectively dead since 23/8/11. Then for some "inexplicable" reason, there is a new post on 22/5/11 that adds very little new insight. Now I wonder why that might have happned. Maybe there is some sort of "event" on at the moment. Nope, can't think of it. It is a mystery might be because you have issues with the lean card aswell and "magically" fell over this topicwhile scavaging through the forum

Suggestion To thank Quote Answer

5/26/2014 10:43 AM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Retroman Hello I have change black bus connector it is same i dont know this error This fix is not for all errors Please give us some more details, Like CPU and CP partnumber, behaviour of the Led's What's in the diagnostics? How is the configuration setup ? Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

4/10/2018 2:40 AM	Rate (0)
Gloire Member Joined: 3/6/2018 Last visit: 8/16/2024 Posts: 1 Rating: (0)	Thank you so much for your answer, I have this same problem and I will apply your method.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on