Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP243 IT AND HTML

Created by: JEAN_MARIE69 at: 2/11/2008 9:09 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/11/2008 9:09 PM	Rate (0)
JEAN_MARIE69 Posts: 7 Rating: (0)	HELLO I have two questions 1-HOW TO CREATE DIRECTORIES IN THE CP243 IT? 2-here is a piece of my html script I want to create a picture(board) with variables S7 and it does not work he(it) posts(shows) ' B ' instead of the contents of the variable. Beforehand thank you for your help Attachment code.zip (190 Downloads)
JEAN_MARIE69 Posts: 7 Rating: (0)	Last edited by: JEAN_MARIE69 at: 11.02.2008 21:14
Suggestion To thank Quote Answer

2/12/2008 10:41 AM	Rate (0)
RICII Posts: 34 Rating: (0)	Dear Jean marie69 If you load windows command prompt and type "FTP" press enter, Type "open xxx.xxx.xxx.xxx" x = the CP243IT IP address you will have to log in with user name and password setup during wizard configuration next type "MD new_folder" type DIR and you should see the new_folder appear on the directory list. if you want to remove a folder type "RD the_folder_name" type close or bye to get back to the command prompt and also to log out of the CP243IT regarding your second question, try inserting a space as shown <param name='FORMAT' value=(put a space here)'\B '> ") I'm not 100% sure on this one but i've done something similar on my HTML pages and they work. hope this is of some help to you. Regards RICII
RICII Posts: 34 Rating: (0)
Suggestion To thank Quote Answer

2/13/2008 7:50 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, to create user defined HTLM pages I use the Spider control SW tool. A free of charge demo you can download here: www.spidercontrol.net. The tool for S7-200 only costs ~300€. The tool for Simatic IT (S7-200/300 and 400) cost ~1000€. I hope this helps. Regards Helmut
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on