Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPDHB driver for CP581

Created by: TechFOX at: 4/26/2007 8:45 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

4/26/2007 8:45 AM	Rate (0)
TechFOX Posts: 13 Rating: (0)	A S5-115U system with CP581 isdown and i wish to see it working. During start-up, the STOP & FAULT LEDs are briefly lit. Thereafter, none of the three LEDs are lit. I undestand that the CPDHB driver needs to be installed. Please guide for the installation procedure (viz. which cable to be connected between CP & PG, step by step procedure for setting up the system).
TechFOX Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/26/2007 9:37 AM	Rate (0)
Simaticus Bronze Member Joined: 1/30/2007 Last visit: 6/3/2022 Posts: 262 Rating: (24)	Hi TechFOX, cp581 is a pc!!! So you need keyboard and screen. Good luck

Suggestion To thank Quote Answer

4/26/2007 10:46 AM	Rate (0)
TechFOX Posts: 13 Rating: (0)	Please provide me with the connection details and software (CPLINK) for debugging the problem(I have Step5 installed in my laptop).In the existing system a special HMI consisting of unique keyboard is set up. I suspect, that the specially designedkeyboard is faulty but would like to confirm the same through a connection diagram. Either way i wish to debug the CP581 and understand what's going on for which keyboard connection diagram is essential. By the way, i have a 5 pin PS/5 type Keyboard.
TechFOX Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/26/2007 1:44 PM	Rate (0)
Simaticus Bronze Member Joined: 1/30/2007 Last visit: 6/3/2022 Posts: 262 Rating: (24)	Hi TechFOX, olease try the manual for cp581: http://support.automation.siemens.com/WW/view/en/1109471 Good luck

Suggestion To thank Quote Answer

4/28/2007 9:06 AM	Rate (0)
TechFOX Posts: 13 Rating: (0)	I have the CP581 manual with me. To diagnose the problem, i believe the CPLINK software is necessary. Would you please give this / any software for CP581. Also, as mentioned earlier, i suspect the Keyboard interface (COM2) is faulty. Is there any alternative for setting up this system..
TechFOX Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/30/2007 12:54 PM	Rate (0)
Simaticus Bronze Member Joined: 1/30/2007 Last visit: 6/3/2022 Posts: 262 Rating: (24)	Hi TechFOX, please contact Simatic Customer Support... Good luck

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on