Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU - Diagnostic Buffer

Created by: Marciel at: 1/18/2012 5:59 PM (5 Replies)

Rating (1)

Thanks 1

6 Entries

1/18/2012 5:59 PM	Rate (1)
Marciel Posts: 21 Rating: (3)	Hello I wonder if anyone knows ifwhen the CPU isrunning and then a power failure occurs this type of event is recorded inDiagnostic Buffer, I did a test using a S7 400 CPU and the event wasn't recorded in Diagnostic Buffer. So,Do you knowif it is necessary addtional settings to record this event type ? Best regards ! Marciel Fernandes Automation Trainee
Marciel Posts: 21 Rating: (3)
Suggestion To thank Quote Answer

1/19/2012 6:05 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	marciel Hello I wonder if anyone knows ifwhen the CPU isrunning and then a power failure occurs this type of event is recorded inDiagnostic Buffer, I did a test using a S7 400 CPU and the event wasn't recorded in Diagnostic Buffer. So,Do you knowif it is necessary addtional settings to record this event type ? Best regards ! Marciel Fernandes Automation Trainee Dear marciel, What do you think about checking startup information provided by "Startup Organization Blocks(OB100,OB101,OB102)". Check the online manual of Step7 for more information. Best regards, Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_558544

1/19/2012 4:03 PM	Rate (0)
Marciel Posts: 21 Rating: (3)	Hello I read about OB100 101 e 102 and I understood what the principle of operation these ogarnization blocks. But, I'm trying to acess the variable TEMP OB101_STRTUP as follows: L #OB101_STRUP T MW 0 So, nothing happens when I reset the CPU. What am I doing wrong? This code above is in OB101, there is nothing in OB1. Best Regards!
Marciel Posts: 21 Rating: (3)
Suggestion To thank Quote Answer

1/19/2012 7:38 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	marciel Hello I read about OB100 101 e 102 and I understood what the principle of operation these ogarnization blocks. But, I'm trying to acess the variable TEMPOB101_STRTUPas follows: L #OB101_STRUP T MW 0 So, nothing happens when I reset the CPU. What am I doing wrong? This code above is in OB101, there is nothing in OB1. Best Regards! Dear marciel, I think checking the start up tab in CPU properties in hw config will be helpul to decide which OB(100,101,102) is executed in case of start up! OB100->Warm restart OB101->Hotrestart OB102->Coldrestart also this link for more information: What is the difference between a restart (warm restart), cold restart and hot restart of a S7-400 CPU? Best regards, Hamid Hosseini
	Last edited by: hdhosseini at: 1/19/2012 7:39 PM //typo Demo Channel on Youtube
Suggestion To thank Quote Answer

1/20/2012 11:01 AM	Rate (0)
Marciel Posts: 21 Rating: (3)	Thanks for your help ! I was using a CPU 315-2 DP, it just have the OB 100 ( Warm Restart ). Now I can get the temporary variables of own OB 100 and handle the events. So, just for more information hdhosseini, still about organization blocks, then when I want to get some specific information about the module I must insert the correct OB, and within this OB manage the temporary variable that give me the information, OK !? Thedoubt is,I just insert some OB (Thereisno code inthis OB) does not mean that the information will be present in Diagnostic Buffer when thisOB is called, correct? Best Regards hdhosseini ! Marciel Fernandes Automation Trainee
Marciel Posts: 21 Rating: (3)
Suggestion To thank Quote Answer

1/20/2012 1:58 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello Marciel, Yes, it does not mean. Just with that OBs temps you receive an extra info - let's say in details. The same story with errors OBs. Which organization blocks do you need for error handling? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on