Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

data blok 48 in RFID system

Created by: Zrnco at: 3/7/2017 8:19 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/7/2017 8:19 PM	Rate (0)
Zrnco Posts: 4 Rating: (0)	Hello , I need to help with data block 48 which is using for order the commands. How can I use DB48 in a wincc. Is it possible to write out as a string or array? Thanks for answer,
Zrnco Posts: 4 Rating: (0)
Suggestion To thank

3/8/2017 4:40 PM	Rate (0)
Owei Gold Expert Joined: 10/1/2013 Last visit: 5/8/2024 Posts: 605 Rating: (71)	Hi Zrnco, you already started a topic concerning this question. It has been moved to "SIMATIC WinCC": https://support.industry.siemens.com/tf/ww/en/posts/db-with-1024-bytes-used-in-wincc/162799/?page=0&pageSize=10

Suggestion To thank

3/9/2017 9:57 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	Closed cause question posted twice. The second thread with the subject DB with 1024 bytes used in wincc is published within the SIMATIC WinCC conference Best regards Min_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on