Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

data logging 313C-2DP

Created by: Kolma at: 3/14/2006 3:58 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/14/2006 3:58 PM	Rate (0)
Kolma Posts: 57 Rating: (1)	Hello! What is the simplest&cheapest way to export data from PLC to PC (measurements, alarms) in predefined time intervals? I have CPU 313c-2dp in combibation with TP170A. Thank you! Kolma
Kolma Posts: 57 Rating: (1)
Suggestion To thank Quote Answer

3/14/2006 8:38 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 12/20/2024 Posts: 4373 Rating: (1458)	Hi, I think that the cheapest way is use PRODAVI and a user program to access the driver. I think that the simplest way is use a SCADA system like Protool/pro, WinCC flexible Advanced or WinCC. As connection you can use Ethernet (if a S7 has a interface) or MPI (with a PC adapter in PC side, for example).
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

3/15/2006 8:09 AM	Rate (0)
Kolma Posts: 57 Rating: (1)	Thank you for your answer! But what is this PRODAVI? Where can I find anything about it? Kolma
Kolma Posts: 57 Rating: (1)
Suggestion To thank Quote Answer

3/15/2006 5:58 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 12/20/2024 Posts: 4373 Rating: (1458)	Hi, Prodave is a driver library for comunication throught MPI or Ethernet. A short discription can be found in ST70 (http://www.siemens.com/simatic/printmaterial). The manual can be found in the link http://support.automation.siemens.com/WW/view/en/21973664
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on