Desigo CC ClickOnce

Hallo,

I did ClickOnce, installed certificates, and an application. It starts but nothing is displayed.

On the server in the User Session I see that the user has connected and is active.

What could be the problem?

Thanks.

To me it looks like as the logged in user 'b' does not have a user security group assigned. Please check configuration. Have you tried with another user? 

Roger

yes, I tried it also with my standard user for administration. But also nothing is displayed.

Can I log in as one user on the server and in ClickOnce at the same time?

Thanks.

Yes, you can log in with an account on multiple clients at the same time.

Please check if there is a Management Security Group that limits the "Scope". 

Somewhere here?

I have all rights for this user group.

No. Under Security, check if you have a Management Security Group. If yes, check if the Default Web Client is assigned. If so, remove the Default Web Client from the group and check again.

If you can log in but don't see anything, it is typically due to the security settings. Either from the user group or the Management Station group. 

yes! I found it! Thanks a lot!