Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

DHCP

Created by: Berg at: 7/4/2009 6:07 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

7/4/2009 6:07 AM	Rate (0)
Berg Silver Member Joined: 1/17/2006 Last visit: 3/29/2023 Posts: 551 Rating: (29)	Hello, I have one CPU 315-2 PN/DP and I´d like to know howcan I assign a dynamic address to Ethernetvia DHCP ? Greetings !
	"Educate the children and it won't be necessary to punish the men." Pythagoras
Suggestion To thank Quote Answer

7/4/2009 8:12 AM	Rate (0)
Lucky123 Gold Member Joined: 12/20/2008 Last visit: 8/25/2022 Posts: 556 Rating: (236)	Berg Hello, I have one CPU 315-2 PN/DP and I´d like to know howcan I assign a dynamic address to Ethernetvia DHCP ? Greetings ! I don't think it might possible, I think you have manual of this, u can find the technical infohere. And you can find the manualhere

Suggestion To thank Quote Answer

7/4/2009 7:34 PM	Rate (0)
Berg Silver Member Joined: 1/17/2006 Last visit: 3/29/2023 Posts: 551 Rating: (29)	lalit I don't think it might possible, I think you have manual of this, u can find the technical infohere. And you can find the manualhere Maybe another CPU 31X PN ?? I asking it because this week I saw a CompactLogix(Rockwell) working with DHCP and I thought very interesting !! Thank you again ! regards
	"Educate the children and it won't be necessary to punish the men." Pythagoras
Suggestion To thank Quote Answer

7/4/2009 8:18 PM	Rate (0)
jklm Platinum Member Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (303)	Hello, The CP343-1 can have a dynamic IP via DHCP. Requirement / Restriction: If you select this option, it is initially not possible to create a fully specified connection in the STEP 7 project because the local IP address is not known. You must therefore select “unspecified” with passive connection establishment as the connection type.
	Best regards jklm Suggestion was helpful? Feel free to rate it.
Suggestion To thank Quote Answer

7/5/2009 5:21 PM	Rate (0)
Berg Silver Member Joined: 1/17/2006 Last visit: 3/29/2023 Posts: 551 Rating: (29)	edr Hello, The CP343-1 can have a dynamic IP via DHCP. Requirement / Restriction: If you select this option, it is initially not possible to create a fully specified connection in the STEP 7 project because the local IP address is not known. You must therefore select “unspecified” with passive connection establishment as the connection type. Hello, Thank you for the help, now I could see it in STEP7 Catalog specifications. Best regards !
	"Educate the children and it won't be necessary to punish the men." Pythagoras
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on