Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Diagnostics on FM352 cam card

Created by: DavidBrown at: 12/10/2012 3:52 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/10/2012 3:52 PM	Rate (0)
DavidBrown Gold Member Joined: 6/29/2012 Last visit: 12/25/2023 Posts: 975 Rating: (9)	Is there a way to investigate if there is a general fault in the FM352? I know there is a function to read out the diagnostic buffer, but that doesn't tell you if there is at this moment still a fault. You could alse investigate the diagnostic interrupts, but that is trigger based, but I want some kind of continuous signal.

Suggestion To thank Quote Answer

12/10/2012 8:22 PM	Rate (0)
MarceloSCS Posts: 17 Rating: (0)	DavidBrown Is there a way to investigate if there is a general fault in the FM352? I know there is a function to read out the diagnostic buffer, but that doesn't tell you if there is at this moment still a fault. You could alse investigate the diagnostic interrupts, but that is trigger based, but I want some kind of continuous signal. Hi DavidBrown I am looking for the same thing as you. I also do not know how to put the module back to work after a diagnostic interrupt. Themodule outputdo not changethe state, even after I fixed the problem that gave me the diagnostic interrupt. The only way I can put it back to the normal condiction, is cycle the cpu off/on. Any body can help us?
MarceloSCS Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on