3/17/2009 12:36 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello And explanations from manual is not usefull? http://support.automation.siemens.com/WW/view/en/1142916(from page 15) regards |
This contribution was helpful to1 thankful Users |
3/17/2009 2:09 PM | |
Posts: 103 Rating: (11) |
first I want to thank you alot for your attension, second in PP17II side in I adjust the paramters as following : MPI address: 1 Baud rate: 187.5 KBaud Data area type: Marker byte Memory word: 100 Configuring data block: 2 PLC address: 2 PLC type: 300 (S7-300) Highest station address: 126 Number of MPI masters: 1 Attachmentpp17.zip (200 Downloads) |
3/17/2009 3:40 PM | |
Posts: 103 Rating: (11) |
thank you Wizard , I execute your suggestion but nothing change , please keep in touch with me till solve this problem thank you |
3/17/2009 3:48 PM | |
Posts: 103 Rating: (11) |
thank you Wizard , I execute your suggestion but nothing change , please keep in touch with me till this problem solved . thanks. |
3/17/2009 3:52 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello Could be the reason in hardware? Would you check again cable and connectors? regards |
3/17/2009 4:11 PM | |
Posts: 103 Rating: (11) |
thank you UMENCHO , either I choose data block or markerwordindata area type the result not change , in the PDF he told me to get config data block -begining of page 25- I can get UDT file from SIEMENS site and make copy to the content of UDT and paste in DB2 , my problem is how to integrate the data in DB2 in the SW that I download to PLC hint-- the SW of PLC in the attachment of the first thread , in the attachment here you will find the UDT that I downloaded from siemens site AttachmentDB2.pdf (193 Downloads) |
3/19/2009 9:39 AM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello Finaly the decision is:
regards |