Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

display off

Created by: sssonawane at: 3/31/2014 8:13 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

3/31/2014 8:13 AM	Rate (1)
sssonawane Posts: 7 Rating: (1)	Dear all, when i connect wire to last input of LOGO i.e 9th terminal of input slot of LOGO 0ed1 052-1md00-0ba6 DISPLAY OFF. input coming to module but display not showing. please suggest any option to show display. REGARDS,
sssonawane Posts: 7 Rating: (1)
Suggestion To thank Quote Answer

3/31/2014 8:34 AM	Rate (0)
Andres Str Posts: 26 Rating: (6)	Hi. As it is correct to make connection of the module of expansion with the LOGO!. Maybe this information will be useful in the attached file. Attachment 1234.jpg (199 Downloads)
Andres Str Posts: 26 Rating: (6)
Suggestion To thank Quote Answer

4/4/2014 9:02 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Maybe you use flag 27. This is to change to the second charackterset for the display. If you don't use it, then the display is empty and should show "no message configured or similar. hope this helps
Helmut_13 Posts: 2930 Rating: (432)	Last edited by: Helmut_13 at: 4/4/2014 9:03 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on