Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Draw graph wincc using script

Created by: MVSeat at: 5/17/2011 3:42 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

5/17/2011 3:42 PM	Rate (0)
MVSeat Regular Member Joined: 3/21/2011 Last visit: 10/25/2024 Posts: 12 Rating: (0)	i want to make a graph from data out of a DB. Lets say i got 5 position in my DB, and each position has a value. Like: Position 1 = 1 Position 2 = 3 Position 3 = 6 Position 4 = 8 Position 5 = 9 With this information i want to draw a line like a trend. Anyone knows if this is possible? and if it is, where can i find some code to get this working. (assuming it needs to be done with a script) Iam using wincc flex. 2008

Suggestion To thank Quote Answer

5/18/2011 9:24 AM	Rate (1)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating: (161)	Hello, you can dynamize a line or a polygone for example via script. Take a look at this FAQ: How do you dynamize objects in WinCC flexible via scripts? best regards

Suggestion To thank Quote Answer

5/18/2011 11:00 AM	Rate (0)
MVSeat Regular Member Joined: 3/21/2011 Last visit: 10/25/2024 Posts: 12 Rating: (0)	Thanks for the link. I think i will be able to make a trend like figure with that information.

Suggestion To thank Quote Answer

5/18/2011 4:29 PM	Rate (0)
MVSeat Regular Member Joined: 3/21/2011 Last visit: 10/25/2024 Posts: 12 Rating: (0)	I got the first part. But i cant find how to assingn the position to a corner point of the polygon. I need a command like Height to insert a value. For polygon i need a position and 2 coordinates for a corner point. but i cant find de right command for it. Anyone know where to find it?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on