Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

DXR2 how to use CMD_AG : command group

Created by: hoaild22@gmail.com at: 3/19/2022 6:03 AM (5 Replies)

Rating (2)

Thanks 1

6 Entries

3/19/2022 6:03 AM	Rate (0)
hoaild22@gmail.com Bronze Member Joined: 7/6/2010 Last visit: 11/9/2024 Posts: 84 Rating: (1)	Dear expert please help me how to use CMD_AG on DXR2. I am testing but it does not work with Error 20 (pls see picture attach) Attachment ABT Pro_1.png (392 Downloads)

Suggestion To thank Quote Answer

3/21/2022 8:51 AM	Rate (0)
hoaild22@gmail.com Bronze Member Joined: 7/6/2010 Last visit: 11/9/2024 Posts: 84 Rating: (1)	Hello Some body help me about this case?

Suggestion To thank Quote Answer

3/21/2022 11:13 AM	Rate (1)
Waedi1974 Advanced Member Joined: 6/25/2013 Last visit: 3/20/2024 Posts: 13 Rating: (13)	Hello, Most probably, your XFB CMD_AG isn't connected to a group master object. See example in attachment. Best regards Attachment XFBconnectedGroupMasterObject.png (372 Downloads)

Suggestion To thank Quote Answer

3/21/2022 12:53 PM	Rate (0)
AutoGen_6144555 Advanced Member Joined: 8/17/2021 Last visit: 9/27/2024 Posts: 200 Rating: (3)	Hi, I`ve had a similar issue on the PXC4.E16. Did you manage to sort it out? Can you show the exact error message you`ve got?

Suggestion To thank Quote Answer

3/22/2022 8:00 AM	Rate (1)
hoaild22@gmail.com Bronze Member Joined: 7/6/2010 Last visit: 11/9/2024 Posts: 84 Rating: (1)	Thanks you for you support. I had link to group master and everything work.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

3/22/2022 8:06 AM	Rate (0)
hoaild22@gmail.com Bronze Member Joined: 7/6/2010 Last visit: 11/9/2024 Posts: 84 Rating: (1)	it is error 20 (Object is not accessible). i had link CFC chart to Group master and it work.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on