Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Embedding C# windows application into WinCC picture?

Created by: winston at: 6/28/2007 4:27 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/28/2007 4:27 PM	Rate (0)
winston Posts: 4 Rating: (0)	I've created a trending application in C# and I'd like to have it displayed on one of the pictures within my WinCC project however I've been unable to figure out exactly how to acheive this. Anybody have any suggestions? Cheers!
winston Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/28/2007 10:22 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi did you program a kind of ActiveX or an EXE.application (normally I just use C/VBS)? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/29/2007 11:17 AM	Rate (0)
winston Posts: 4 Rating: (0)	No not yet, which would be the most straightforward? .exe or active X?
winston Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/29/2007 1:22 PM	Rate (0)
Krish Silver Member Joined: 5/24/2007 Last visit: 4/24/2024 Posts: 284 Rating: (27)	Hi See if you can develop your program (or port it if already developed) as aclass library in Visual Studio. The result of this is an activex dll which can be then embedded in WinCC using control registration. That is the easier part. The tougher one is how you will transfer proerties between WinCC or other program or into ActiveX. So give a good thought onthe interfaces you will needbefore implementing it. Krish

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on