4/2/2012 5:00 AM | |
Joined: 10/7/2005 Last visit: 11/13/2024 Posts: 3027 Rating: (1057)
|
Hello umair ahmed
this is entirely up to you, as long as you make sure that the S5 Timer is supplied with an S5 Time format compliant value. have a look at the FAQ below which will show you ways in case you use a Siemens HMI: How do you specify the runtime for a timer via an operator panel, or how do you output the remaining runtime? Should you use a non Siemens HMi/SCADA, do a search on the subject of HMI and S5 Timer @ https://support.automation.siemens.com and you'll find plenty of other ways to accomplish this. I hope this helps |
Cheers |
|
8/10/2016 9:14 AM | |
Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122) |
New question published by Soroosh is split to a separate thread with the subject Errors in the diagnostic part of s7 300 plc. Best regards |
Follow us on