Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ET200M with safe I/O modules connect to non-Siemens safety CPU

Created by: Francisco Oliveira at: 2/12/2014 5:15 PM (4 Replies)

Rating (1)

Thanks 0

5 Entries

2/12/2014 5:15 PM	Rate (0)
Francisco Oliveira Posts: 6 Rating: (0)	I have an ET200M (interface IM153-2) with some safe I/O modules like those mentioned in my first post. I was wondering if it is possible to connect ET200M with these safe I/O modules to a non-Siemens safety CPU with PROFIBUS DP/PROFIsafe master, but I observed that GSD of ET200M doesn’t include the safe I/O modules neither F-parameters and i-Parameters for these safe modules. So, I understood that these I/O modules can only be parameterized with STEP7 or TIA, and connected to Siemens safety CPUs. Is this true?
Francisco Oliveira Posts: 6 Rating: (0)	Last edited by: GrasserF at: 2/13/2014 9:00 AM new subject after splitting from /tf/WW/en/Posts/103312
Suggestion To thank Quote Answer

4/29/2015 8:00 AM	Rate (1)
AutoGen_718506 Posts: 3 Rating: (3)	Seems like the F modules wont come in TIA also when we use gsd files for Siemens remote stations like ET200M, ET200S while corresponding mdd files have them
AutoGen_718506 Posts: 3 Rating: (3)
Suggestion To thank Quote Answer

7/10/2015 7:23 PM	Rate (0)
Francisco Oliveira Posts: 6 Rating: (0)	This answer wasn't helpful... actually it looks like my question wasn't understood. Maybe I could simplify by asking the reason that inside the GSD files available on this link (for 6ES7 153-2BA*2-0XB0 - IM153-2 HF) doesn't include the fail-safe modules (SM326-1, SM326-2 and 336-4 in my case). Exists another place where can I get GSDs for IM153-2 HF including fail-safe devices?
Francisco Oliveira Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

7/14/2015 10:53 AM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1054)	hi Francisco, to get the failsafe-modules in Step7-HW-Konfig you need the rigth F-Configuration-Pack. When you install it, it puts all the modules in your HW-Catalogue. You can download it here: Download of the F-Configuration-Pack Unfortunally I don´t know how it works with an external engineering-SW. The GSD-File for Profibus- ET200M-HF can be downloaded here: PROFIBUS GSD files : ET 200M hope that helps, regards,
	FCK WAR! Be nice!
Suggestion To thank Quote Answer

10/19/2015 12:13 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by mr.adi is split to a separate thread with the subject Relpace ET200M. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on