Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ET200S fault

Created by: josbar89 at: 6/16/2017 10:23 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/16/2017 10:23 PM	Rate (0)
josbar89 Posts: 25 Rating: (0)	Hello, I have a problem with a ET200S (IM151-1). Ramdonly the machine faults and the SF start to flash a few times slowly and then the BF led flash like 8 times.. over and over again. The modules connected to the ET200S they all look ok, not one on fault and everyt led on green. It flash de SF alone, and then de BF alone, over and over again. For now I don´t have access to the diagnostic buffer.
josbar89 Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

6/17/2017 6:01 AM	Rate (0)
Sachinpatke Silver Member Joined: 12/9/2010 Last visit: 10/8/2022 Posts: 623 Rating: (77)	Hi josbar89, Replace connectors and IM module and Check.
	If you like the comment, rate it (right top) or thank it (left bottom). One who says he can & one who says he can't, are both correct-Confusius. Automation- C2C, Management Sachin Patke, India.
Suggestion To thank Quote Answer

6/20/2017 8:54 PM	Rate (0)
syd_b Bronze Member Joined: 2/3/2011 Last visit: 12/6/2024 Posts: 348 Rating: (10)	Hi, sometimes is a faulty module. The following manual could help. https://support.industry.siemens.com/cs/attachments/35363377/et200s_im_151_1_standard_im_151_1_high_feature_product_info_en-US_en-US.pdf?download=true
	Last edited by: Jen_Moderator at: 6/22/2017 12:02:38 PM Link replaced
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on