Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

faceplates

Created by: Dh_1811 at: 9/23/2013 10:18 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/23/2013 10:18 AM	Rate (0)
Dh_1811 Posts: 24 Rating: (0)	HI, I am trying to create a faceplate but when I do so I find way too many contained objects. For example, if I have created a rectangle I have to configure a connection with border color, background fill pattern etc. And this is just for appearance and there are more objects to add such as design, layout etc. Please have a look at the attachment. My question is whether I have to add all this to create my faceplate? Attachment faceplate.JPG (337 Downloads)
Dh_1811 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

9/23/2013 3:40 PM	Rate (0)
KM_AS Silver Member Joined: 11/23/2011 Last visit: 9/30/2024 Posts: 202 Rating: (32)	Hello Dh_1811, please have a look on the following link: http://support.automation.siemens.com/WW/view/en/78380998 Maybe it would be helpful in some case. Greetings, KM_AS

Suggestion To thank Quote Answer

9/24/2013 9:44 AM	Rate (0)
Dh_1811 Posts: 24 Rating: (0)	hi KM_AS, thanks for your reply. I have had a look at the link and all it has done is further clarify the purpose of faceplates. My problem is mainly to do with working on the faceplates type. I have so many contained objects (as shown in the previous attachments) that I amunsure of what I needto link in order to create my template type.
Dh_1811 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

9/27/2013 10:33 AM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, here you find examples of faceplates. http://support.automation.siemens.com/WW/view/en/68014632 http://support.automation.siemens.com/WW/view/en/67318600 Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on