Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

fire alarm communication

Created by: ika kusnanda at: 8/29/2013 11:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/29/2013 11:08 AM	Rate (0)
ika kusnanda Posts: 1 Rating: (0)	hello im ika from wethco indonesia. we have a problem in the installation of fire alarm sensors such as FDO181, FCO 181, FDIL181 etc. to the controller (FC1840). From the sensor to the controller we use a regular power cable in the installation. however, during testing, the communication error. After I read the manual book, it turns out in the installation must use and FR18 FD18-BUS-BUS. I want to ask, where can I get FD18-BUS-BUS and the FR18.? If one does not use it, as I could use a replacement cable is anything else to wear and FR18 FD18-BUS-BUS? I kept asking how the configuration of the sensor to FC1840. Do I need to add an resistor or something so unreadable? please help me and hopefully be returned as soon as possible. Thank you
ika kusnanda Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

8/29/2013 11:23 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	Hello, You are on the industry automation site now, i believe you better have a look at the Buildingtechnologies site. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on