Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how many CPs are possible to be using in case of S7-200?

Created by: Tomy Master at: 3/31/2011 8:05 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

3/31/2011 8:05 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 5/28/2024 Posts: 914 Rating: (40)	OK, I am wondering if I used 3 CP243-1, and each CP is assigned for an HMI. Is that possible? Regards. Tomy. Splitted from S7-200 With Third Party Panels Via Ethernet !.
	Last edited by: O_Moderator at: 4/1/2011 11:11 AM new subject after splitting Aim Higher
Suggestion To thank Quote Answer

3/31/2011 8:13 PM	Rate (1)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Attention Only one CP 243-1 should be connected per S7-200 CPU. It cannot be guaranteed that the S7-200 system will operate properly if additional CP 243-1 are connected. best regards, Hristo Mihalev

Suggestion To thank Quote Answer

3/31/2011 8:30 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 5/28/2024 Posts: 914 Rating: (40)	So what do you recommend? Regards.
	Aim Higher
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on