How to config LTMR controller to send date to PIW420 and receive data from PQW354

Hi every masters:

I read the following:

Network 18 : FAN 1 LTMR  MAPPING

L     PIW 420

T     DB60.DBW   0

......

L     DB60.DBW   24

T     PQW   354

The above is fine, but I haven't idea about how to config LTMR controller to let it know send date to PIW420 and receive data from PQW354 as mentioned above.

I hope help from kind supports.

Regards from qwermhc 

------------------------------------------------------------------------------------------
Split from connect s7300 to schneider tesys t via profibus.

Hello,

only general recomendation, for this you need check FAN documentation depended to your connection type (PB Dp or PN or other). There are then slots for data exchange on <Master> generally. Check documentation what addresses are available on FUN and what they nedd to set or have available. You only via slots define address (free available on your CPU) which can be manipulated like I/O, simply you'll read data from FAN in your PIX addresses and write data from your PQX address depended to data type - speed is expected f.ex. as Word, so f.ex. write speed to specific address is :

.... load some value

T PQW240 //This can be that defined address in some slot defining FAN speed f.ex.