How to configure WP231 for analog output by siwatool V7?

Dear Expert,

I have one WP231 siwarex  module. I need analog output value from this module. So How to configure the module for analog output by siwatool V7?  This WP231 siwarex  module works in stand-alone. Please give me the Configure procedure.

Best Regards

Apon

------------------------------------------------------------------------------------------
Split from How to configure WP231 to control its outputs ?.

Siwarexi

Hello Apon,

You can configure the analogue output by using the Siwatool software into the DR7:

1.
Select the correct range with the parameter „Range analog output“:
0 ... 20 or 4 ... 20 mA.

2.
Select the desired value, which you want to use for the analogue output:
Net weight, Gross weight, ... .

3.
Set the correct start-value (e.g. „0“ for 0/4 mA) with the parameter „Start value analog output“.

4.
Set the correct end-value (e.g. „100“ for 20 mA) with the parameter „End value analog output“.

Best regards

Siwarexi

Thanks for your reply. I have already did all this things. And the AQ LED Light showing green. But how can I find the mA output value in Siwatool V7? So that It is easy for me to understand the changing of mA value.

Best regards

Apon