Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to connect WinCC flexible with STEP7 PLC-SIM on the same computer for testing and debugging?

Created by: LaraCroft at: 4/29/2011 4:06 PM (5 Replies)

Rating (2)

Thanks 0

6 Entries

4/29/2011 4:06 PM	Rate (0)
LaraCroft Posts: 60 Rating: (1)	How to connect WinCC flexible in runtime application for MP277 with STEP7 PLC-SIM all on the same computer for testing and debugging both program together? I have both program on the same Simatic MAnager project. I can run the PLC-SIM without problem. I can run the WinCC Flexible runtime simulator, but there is no link establish with PLC-SIM! How to do it? LaraCroft
LaraCroft Posts: 60 Rating: (1)
Suggestion To thank Quote Answer

4/30/2011 7:30 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/18/2022 Posts: 10221 Rating: (1175)	Hello, Try this WinCC Flexible and PLCSIM Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

5/2/2011 6:41 PM	Rate (0)
FranMar Advanced Member Joined: 1/22/2011 Last visit: 6/23/2022 Posts: 43 Rating: (0)	Hi I was in the same situation....I have a S7-300 CPU 314 and a MP 277 10¨....when I was testing my HMI program I have to comunicate with MPI cable to PLC for download the program. And that was Ok...I setting the interface PG/PC adress 2 not auto. Then when I was trying to run HMI program....first I openned the S7 program and PLCSIM...create a new plc with all digital in/out put´s andanalog input.Second...I compile my HMI program in WinCC FLexible and RUN....and it was working together....with no problem.....

Suggestion To thank Quote Answer

8/17/2011 5:35 AM	Rate (2)
SadiqAsgher Posts: 31 Rating: (2)	Hi, Very simple to integrate WinCC Flexible with Step 7 using PLCSIM. Follow these steps. 1. Start Simulator 2. Set Connection Type (ie MPI or TCP/IP etc). 3. Download Program to Simulator. 4. Start WinCC Flexible. 5. Define Connection Type. 6. Save & Generate. 7. Start Run Time (Not RT with Simulation). 8. Switch PLC Status to RUN-P. One more thing connection type should be same for WinCC and Step 7. Regards Sadiq
SadiqAsgher Posts: 31 Rating: (2)
Suggestion To thank Quote Answer

9/2/2013 7:38 AM	Rate (0)
pacific 85 Member Joined: 7/4/2011 Last visit: 1/7/2023 Posts: 9 Rating: (0)	dear , its very easy...after i have read your post i have tried in my simatic manager. i just select cpu and hmi as you said. then follow step by step action. may be below file can help you Attachment plcsim_hmi.JPG (1167 Downloads)
	Last edited by: pacific 85 at: 9/2/2013 7:40 AM
Suggestion To thank Quote Answer

9/2/2013 7:41 AM	Rate (0)
pacific 85 Member Joined: 7/4/2011 Last visit: 1/7/2023 Posts: 9 Rating: (0)	also find this Attachment Plcsim_hmi.zip (757 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on