Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

HOW TO CREAT A M-CODE AND TO RUN NC PROGRAM .

Created by: mgopal at: 3/20/2010 3:09 AM (15 Replies)

Rating (1)

Thanks 4

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

3/20/2010 3:09 AM	Rate (0)
mgopal Posts: 18 Rating: (1)	HAI HOW TO CREAT A M-CODE AND WITH THE HELP OF M-CODE HOW TO RUN A NC PROGRAM (PART PROGRAM )840D SYSTEM .TOOL CHANGING PROGRAM ALREADY CREATED .FIND ME THE SOLUTION TO RUN THE USER PROGRAM WITH M-CODE .
mgopal Posts: 18 Rating: (1)	Last edited by: mgopal at: 3/20/2010 3:12 AM
Suggestion To thank Quote Answer

3/20/2010 4:19 AM	Rate (0)
phgo Advanced Member Joined: 5/22/2009 Last visit: 5/3/2022 Posts: 40 Rating: (0)	The M code for the 840D are Chanel specific and are in DB21 for chanel 1 , DB22 for CH2 .... and must be decoded in plc best regard

Suggestion To thank Quote Answer

3/20/2010 9:28 AM	Rate (0)
mgopal Posts: 18 Rating: (1)	hai thank now i created m code via plc .but how to call a user program by m code .please solve it (840d).
mgopal Posts: 18 Rating: (1)
Suggestion To thank Quote Answer

3/20/2010 12:00 PM	Rate (0)
phgo Advanced Member Joined: 5/22/2009 Last visit: 5/3/2022 Posts: 40 Rating: (0)	if i have understand you want start a sub program by a M code Check this param 10814 and 10815 exemple in doc in cd : Call the subprogram M101_MAKRO by the M function M101 $MN_EXTERN_M_NO_MAC_CYCLE[0] = 101 $MN_EXTERN_M_NO_MAC_CYCLE_NAME[0] = ”M101_MAKRO” Call of the subprogram M6_MAKRO by the M function M6.$MN_EXTERN_ M_NO_MAC_CYCLE[1] = 6 $MN_EXTERN_M_NO_MAC_CYCLE_NAME[1] = ”M6_MAKRO” Best regard

Suggestion To thank Quote Answer

3/29/2010 1:39 AM	Rate (0)
mgopal Posts: 18 Rating: (1)	HAI SORRY I CAN'T GET U. I TRIED BUT I CAN'T PASS OVER.SO PLEASE EXPLAIN THE PROCDURE AGAIN .
mgopal Posts: 18 Rating: (1)
Suggestion To thank Quote Answer

3/30/2010 4:55 PM	Rate (0)
CNC600 Silver Member Joined: 10/27/2009 Last visit: 9/29/2023 Posts: 455 Rating: (76)	Hi, 1. create a subprogram M101_MACRO.SPF 2. inside this SPF: G0 X100 Y100 M17 3. define these MD: $MN_EXTERN_M_NO_MAC_CYCLE[0] = 101 $MN_EXTERN_M_NO_MAC_CYCLE_NAME[0] = ”M101_MAKRO” 4. Type in Your MPF: ... M101 ... The system replaces "M101" automatically by M101_MACRO.SPF and execute "G0 X100" and "Y100". Ofcourse You can define different MCODEs and SPF-names as well. Even the content of the SPF can be different..... hope that helps CNC600
	hope that helps CNC600
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ilafuente

4/1/2010 1:34 AM	Rate (0)
mgopal Posts: 18 Rating: (1)	HI ITRIED . IT IS NOT WORKING subprogram M60_MACRO.SPF $MN_EXTERN_M_NO_MAC_CYCLE[0] = 60 $MN_EXTERN_M_NO_MAC_CYCLE_NAME[0] = ”M60_MAKRO” WHAT IS THE DIFFERENCE BETWEEN MACRO AND MAKRO? BUT I FOLLOW SEQUENCE THAT U HAD GIVEN IT IS NOT OK . BUT I CHECKED GIVING SAME FILE NAME NOT OK .
mgopal Posts: 18 Rating: (1)	Last edited by: mgopal at: 4/1/2010 1:44 AM Last edited by: mgopal at: 4/1/2010 1:43 AM Last edited by: mgopal at: 4/1/2010 1:43 AM
Suggestion To thank Quote Answer

4/2/2010 12:49 AM	Rate (0)
CNC600 Silver Member Joined: 10/27/2009 Last visit: 9/29/2023 Posts: 455 Rating: (76)	Sorry, my mistake... When You createdYour subprogram as "M60_MACRO.SPF", so You have to define $MN_EXTERN_M_NO_MAC_CYCLE[0] = 60 $MN_EXTERN_M_NO_MAC_CYCLE_NAME[0] = ”M60_MACRO” as well. The Subprogram name and the String in $MN_EXTERN_M_NO_MAC_CYCLE_NAME[0] have to be equal. ************************************* The replacement with the already spoken MD's works only when the "extern programming" has been activated. For standard using please modifythese MD: MD10715 $MC_M_NO_FCT_CYCLE[0] = 60 MD10716 $MC_M_NO_FCT_CYCLE_NAME[0] = "M60_MACRO" The functionality is the same, but it's active in standard mode hope that helps CNC600
	Last edited by: CNC600 at: 4/2/2010 1:18 AM hope that helps CNC600
Suggestion To thank Quote Answer

4/3/2010 10:28 PM	Rate (0)
mgopal Posts: 18 Rating: (1)	hai I followed the procdure but it is not succed .while running the part program a alarm message is displayed ."M101_MACRO" is not existing or will be edited .here i attached the photo .find the attachment . Attachment DSC03937.JPG (398 Downloads)
mgopal Posts: 18 Rating: (1)
Suggestion To thank Quote Answer

4/4/2010 7:35 AM	Rate (0)
Pee Ell Sea Posts: 672 Rating: (56)	Your message says 101_MACRO not M101_MACRO. Either call M101_MACRO or create a program called 101_MACRO
Pee Ell Sea Posts: 672 Rating: (56)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on