Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to open Smart 1000 WinCC Flexible Project

Created by: grego_l at: 3/21/2012 9:56 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/21/2012 9:56 AM	Rate (0)
grego_l Experienced Member Joined: 6/25/2009 Last visit: 5/22/2023 Posts: 36 Rating: (5)	Hello everyone I have WinCC Flexible SP 2 Update 13 software. Is there a way to open and downloadwith this software Chinese HMI Siemens SimaticSmart 1000? I couldn't find anything about Siemens Simatic Smart 1000 or 700 on English Siemens site. On Chinese Siemens site (I can't read Chinese I used online translator)they say to open or create project I need:1. WinCCFlexible2008SP2China. 2. WinCCFlexible2008SP2update13 3. SmartPanelHSP 4. SmartPanelHSPupdate2 It looks like those Smart panel HSP can be installed only on WinCCFlexible2008SP2China. I even managed to install Smart Panel HSP on English WinCC Flexible by changing regional and language option /advance to Chinese and changing in registry edition of my WinCC Flexible to Chinese. Unfortunately after I open the project I have a message that says this device is not intended for my version of WinCC Flexible. My question is: Is there a way to open Smart 1000 or 700 with English WinCC Flexible? Kind regards

Suggestion To thank Quote Answer

3/21/2012 10:21 AM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 3/30/2023 Posts: 1557 Rating: (161)	Hello, no there isn`t a way to open smart panels in the "european" flexible version. You need the ASIA version of WinCC flexible. best regards.

Suggestion To thank Quote Answer

3/21/2012 4:57 PM	Rate (0)
grego_l Experienced Member Joined: 6/25/2009 Last visit: 5/22/2023 Posts: 36 Rating: (5)	That’s what I thought. Thank you very much for quick response.

Suggestion To thank Quote Answer

10/28/2015 2:10 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4812 Rating: (123)	New question published by systematic_bcn is split to a separate thread with the subject Correct software for upload program to HMI. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on