Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I/O address ET200S

Created by: dash at: 12/4/2009 8:17 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

12/4/2009 8:17 PM	Rate (0)
dash Posts: 10 Rating: (0)	Hello guys, i have problem with I/O card. i'm have the configuration below: 6ES7 151-8AB00-0A0B 6ES7 138-4CA01-0AA0 PM-E DC24V 6ES7 131-4BF00-0AA0 8DI DC24V >>>> I100.0....100.7 6ES7 131-4BF00-0AA0 8DI DC24V >>>> I101.0....101.7 6ES7 131-4BF00-0AA0 8DI DC24V >>>> I102.0....102.7 6ES7 131-4BF00-0AA0 8DI DC24V >>>> I103.0....103.7 6ES7 138-4CA01-0AA0 PM-E DC24V 6ES7 132-4BF00-0AA0 8DO DC24V >>>> Q100.0....100.7 6ES7 132-4BF00-0AA0 8DO DC24V >>>> Q101.0....101.7 6ES7 132-4BF00-0AA0 8DO DC24V >>>> Q102.0....102.7 6ES7 132-4BF00-0AA0 8DO DC24V >>>> Q103.0....103.7 6ES7 132-4BF00-0AA0 8DO DC24V >>>> Q104.0....104.7 on the variable table it's shown 100.2 but on the DI / DO card LED light 100.4 is ON.. why this can be happen? and also for another address below : 100.1 become 100.2 100.2 become 100.4 100.3 become 100.6 100.4 become 100.1 100.5 become 100.3 100.6 become 100.5 but for 100.0 and 100.7 it doesn't change.. best regards
dash Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

12/4/2009 9:03 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 9/13/2023 Posts: 1525 Rating: (159)	dash Hello guys, on the variable table it's shown 100.2 but on the DI / DO card LED light 100.4 is ON.. why this can be happen? and also for another address below : 100.1 become 100.2 100.2 become 100.4 100.3 become 100.6 100.4 become 100.1 100.5 become 100.3 100.6 become 100.5 but for 100.0 and 100.7 it doesn't change.. Hi Dash, Please find the Link for the manual & Have a look on Page no 13 for your problem the. there it is given the Chanel No & LED glow seq. http://support.automation.siemens.com/WW/view/en/25511564 please check the Wiring as per the Manual. it is not a problem in module. the same applicable for the output module also 8x24vdc.
	Last edited by: Ammy at: 12/4/2009 9:06 PM Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users dash

12/5/2009 7:04 AM	Rate (0)
dash Posts: 10 Rating: (0)	ok ammy thanks a lot for your post. I'll try to check the wiring also..
dash Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on