insert the servo drive MDX61B, DFE32B in profinet network

Hello All,

I have a problem with the display accessible nodes, it´s not avaliable os the PLC target > ethernet> edit ethernet node. I ping the IP address and i have the response but display anymore for me. I need insert the servo drive MDX61B, DFE32B in the profinet network.

Can you help me?

------------------------------------------------------------------------------------------
Split from configure the device name on Profinet io module. .

Hi,

what exactly is the problem?

In the screen the menu entry is displayed.

This Entry is used to search the bus for connected devices and assign a IP Or name of station.

To create the devices in the project you must install the GSDML Files for the devices in HWConfig and after that Drag&Drop the devices from the catalog to the project.

Regards

Christoph

hi Lucas,

When you can reach the device with ping and not with accessible nodes there is maybe a problem with your anti-virus-scan. Some of them have a feature called "network-protect" that doesn´t allow the MAC-Adress-Broadcast, that is used to find the accessible nodes in Step7. 

You can try to deactivate this function or the whole anti-virus-scan. 

hope this helps,

regards,

Hi Lucas,

I also don´t know exactly what the problem is but perhaps helps my screenshot for the discussion?

Regards,

Towome