Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IPC427E - After start CPU virtual screen shows "Connecting...." and after that "Wrong boot option"

Created by: pavlan1 at: 8/15/2018 3:31 PM (19 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

20 Entries

Entries per page: 10 | all

8/16/2018 1:09 PM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	When I choose legacy Hard Drive and press Enter I get No bootable device -- insert boot disk and press any key Attachment Legacy Hard Drive 1.jpg (1093 Downloads)

Suggestion To thank Quote Answer

8/16/2018 1:25 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/6/2024 Posts: 22474 Rating: (3036)	and is you select efi and press esc after that?

Suggestion To thank Quote Answer

8/16/2018 1:36 PM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	then Windows have been loading normally Why ESC? I choose and press Enter. ESC after that not needed

Suggestion To thank Quote Answer

8/16/2018 2:08 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/6/2024 Posts: 22474 Rating: (3036)	because if 1507 is istalled correct on the IPC the a menu pop up in which you can select if only windows is start or Windos + software controller is start. if this menu is not pop up or not installed then the 1507s would not work. regards christoph

Suggestion To thank Quote Answer

8/16/2018 2:13 PM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	How to install correctly? Does this 1507S suitable for IPC 427E with Windows 10? I already wrote if I install 1507 then all is OK, but if I repair inslatation ten it gives 2 error Does the partition screenshoot is right? There RAW, but not MBR is it right? Does WinCC Runtime Advanced V15 can disturb?
	Last edited by: pavlan1 at: 8/16/2018 2:14:49 PM Last edited by: pavlan1 at: 8/16/2018 2:16:56 PM Last edited by: pavlan1 at: 8/16/2018 2:18:15 PM
Suggestion To thank Quote Answer

8/16/2018 2:37 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/6/2024 Posts: 22474 Rating: (3036)	ipc can be ordered with Win10 and SW Controller 1507s, so yes it work. the installerror in the log is from the VC Redistributables, not from the 1507. the partition looks ok , i have a other shematic here but it should work.

Suggestion To thank Quote Answer

8/16/2018 2:46 PM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	Now I againg deleted the Intel Ripid, updated all Windows and Intel driver. I deleted WinCC runtime deleted 1507 and install 1507 again. It doesnt work. Then it start to install it show 30 min. But have finished already about in 7 minutes without any error. What steps I need to do further?

Suggestion To thank Quote Answer

8/16/2018 3:08 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/6/2024 Posts: 22474 Rating: (3036)	Hello, first check BIOS Settings that legacy Boot is possible second check if you have the named bootoptions (Windoes or Windoes+Software Controller) it can be that you must install the IPC complete from zero included delete of all Partitions Regards Christoph

Suggestion To thank Quote Answer

8/16/2018 3:42 PM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	In Bios are many menu for example [snip] If I choose Boot from file I can find from explorer boot folder and press .efi file [snip] Further is showed this screen [snip] If I press C then is loaded [snip] If Enter then [snip] Further I can't do something more Attachment Images.zip (781 Downloads)
	Last edited by: Jen_Moderator at: 8/17/2018 8:24:33 AM Added files as an attachment.
Suggestion To thank Quote Answer

8/17/2018 10:47 AM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	I re-installed Windows from bootable USB (recovery media) and after that I put the CPU1507. All started to work. Thanks.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users AutoGen_1678225 AutoGen_1571183

|

Share this page:

Share this page on...

Follow us on