Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IPC427E - After start CPU virtual screen shows "Connecting...." and after that "Wrong boot option"

Created by: pavlan1 at: 8/15/2018 3:31 PM (19 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

20 Entries

Entries per page: 10 | all

8/15/2018 3:31 PM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	Hello! I have new IPC 427E with Windows 10 I installed the Software Controller 1507S F on this IPC. After start CPU virtual screen shows "Connecting...." and after that "Wrong boot option" And I can't load project into CPU. What I do wrong? ------------------------------------------------------------------------------------------ Split from IPC427E Problem in boot - The software controller don't startup.
	Last edited by: pavlan1 at: 8/16/2018 9:39:28 AM Last edited by: Jen_Moderator at: 8/16/2018 10:30:51 AM New subject after splitting
Suggestion To thank Quote Answer

8/16/2018 10:43 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/3/2024 Posts: 22472 Rating: (3034)	Hello, which Windows 10? Have you the correct partioning on the disk for the 1507 Sot PLc? Which version of 1507 do you install? Regards Christoph

Suggestion To thank Quote Answer

8/16/2018 11:19 AM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	Hello! I have Windows 10 Enterprise 2016 LTSB CPU 1507S F V2.5 I have tried to reinstall some drivers and tried to delete Intel Rapid storage (how I understand it is AHCI) Windows was pre-installed on this IPC then I bought it. CPU I installed my self Attachment PLC.PNG (880 Downloads)
	Last edited by: pavlan1 at: 8/16/2018 11:20:15 AM
Suggestion To thank Quote Answer

8/16/2018 11:23 AM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	When I try to reinstall (repair CPU) on the finish It give 2 Error. Log here But first install it install normally Attachment SIA_CPU_1507SF@18-08-16_11-33-19_summary.txt (916 Downloads)

Suggestion To thank Quote Answer

8/16/2018 11:48 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/3/2024 Posts: 22472 Rating: (3034)	Hello, can you make a screen how the Disk is partitioned on the IPC? If you press ESC before windows start is there a bootmenu with some entry? Have you activate the legacy mode in the bios? Which ordernumber have the IPC Exactly? Regards Christoph
	Last edited by: ChristophD at: 8/16/2018 11:49:19 AM Last edited by: ChristophD at: 8/16/2018 11:52:29 AM
Suggestion To thank Quote Answer

8/16/2018 12:18 PM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	IPC 6AG4141-5BG47-0FA8 Software Controller 6ES7672-7FC01-0YG0 Each time Windows reboot too long. "Getting Windows ready Don't turn off your computer" on the blue screen. Now I'am trying to come to boot menu. Early I came in. Myabe was "both" to Lagacy and UEFI Attachment Disk Partition.PNG (980 Downloads)
	Last edited by: pavlan1 at: 8/16/2018 12:20:10 PM Last edited by: pavlan1 at: 8/16/2018 12:20:38 PM
Suggestion To thank Quote Answer

8/16/2018 12:32 PM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	In Boot menu was https://photos.app.goo.gl/nJtxz6wrPqfpVjAb9 When I changed to "Legacy only" then i got https://photos.app.goo.gl/DXRZVatZUxdRPutU8 and can't go out from there
	Last edited by: pavlan1 at: 8/16/2018 12:34:34 PM
Suggestion To thank Quote Answer

8/16/2018 12:37 PM	Rate (0)
pavlan1 Experienced Member Joined: 11/9/2017 Last visit: 6/2/2023 Posts: 44 Rating: (0)	A want to add new information I installed WinCC Runtime Advenced V15 before CPU 1057S F V2.5

Suggestion To thank Quote Answer

8/16/2018 12:38 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/3/2024 Posts: 22472 Rating: (3034)	Hello, i mean the bootmenu from the Diskdrive. There should be a entry Windows and a entry Windows + 1500 Regards Christoph

Suggestion To thank Quote Answer

8/16/2018 12:42 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/3/2024 Posts: 22472 Rating: (3034)	poweron the IPC press ESC continued select Boot menu now you should se the boot devices (first EFI then the legacy select in the legacy section the boot Disk press enter and now esc now the bootmenu of the disk should be displayed.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on