Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IPC477D 15"INCH TOUCH ISSUE

Created by: @KB@ at: 11/18/2016 11:40 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/18/2016 11:40 AM	Rate (0)
@KB@ Silver Member Joined: 7/30/2012 Last visit: 12/21/2024 Posts: 335 Rating: (12)	Hi all, I am using IPC477D 15 "inch industrial pc,in that we have faced the touch issue,once we done the calibration and installed the TOUCH DRIVER,there it has no sensitivity in the touch screen. os used:windows 7

Suggestion To thank Quote Answer

11/21/2016 10:41 AM	Rate (0)
xnor Bronze Member Joined: 10/18/2012 Last visit: 11/22/2024 Posts: 225 Rating: (23)	What says the operating system about the available touch input? Does your OS recognize the touch input hardware?

Suggestion To thank Quote Answer

11/22/2016 5:50 AM	Rate (0)
@KB@ Silver Member Joined: 7/30/2012 Last visit: 12/21/2024 Posts: 335 Rating: (12)	everything os ok ie.all the hardware and software in ipc is working well ,only the touch is not working . this kind of issues occured for more than 10 IPC'S.

Suggestion To thank Quote Answer

12/14/2017 2:41 PM	Rate (0)
User_112233 Posts: 1 Rating: (0)	Were you able to solve this issue ? Please advise as I am seeing it occurring on 3 different units as well. Thank you
User_112233 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/4/2019 10:42 AM	Rate (0)
harleybob Posts: 3 Rating: (0)	User_112233 Were you able to solve this issue ? Please advise as I am seeing it occurring on 3 different units as well. Thank you same issue.. I wish a clear answer was available
harleybob Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on