support.automation.siemens.com | Technical Forum | Saturday, March 15, 2025 11:35:10 PM
Is it possible to use MP277F connected trough the CP 343-1?
Created by: Zein at: 2/1/2013 2:29 PM (1 Replies)
Rating 
Thanks 0
2 Entries
| 2/1/2013 2:29 PM | |
Joined: 5/27/2009 Last visit: 3/7/2025 Posts: 122 Rating:
|
Hi, i was thinking i coouldn't generate de F-I/O DB automatically when i compiled HW configuration because i was missing this Library but now i think i can't generate because i have the MP277F connected to the Profinet in CP 343-1 Advanced. Do you know if its possible to use this panel connected trough the CP 343-1? and in this case how can i manage it? By the way i made what readme.txt says but this only install GSD panels, but i don't have the library yet. Thank u. |
Last edited by: O_Moderator at: 2/5/2013 11:13 AMnew subject after splitting from /tf/WW/en/Posts/86972#top |
|
| 2/5/2013 11:15 AM | |
Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating:
|
Thread closed, because question is already discussed in the following thread F00256_Mobile277Failsafe_IO MP277F Best regards O_Moderator |
