Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO 0BA0 and HMI KTP400 Basic: Can connect it to the SIWAREX WP231 via Modbus TCP/IP?

Created by: Manev at: 9/17/2020 2:27 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/17/2020 2:27 AM	Rate (0)
Manev Posts: 18 Rating: (0)	I have 2019 LOGO 0BA0 and HMI KTP400 Basic. Will it be able to connect to the SIWAREX WP231 via Modbus TCP/IP and receive the units from the load cell ? And if it is possible can someone tell me at what resolution will that be? ------------------------------------------------------------------------------------------ Split from S7-1200 and load cell connection.
Manev Posts: 18 Rating: (0)	Last edited by: Manev at: 09/17/2020 02:37:38 Last edited by: Jen_Moderator at: 10/08/2020 13:03:51 New subject after splitting
Suggestion To thank Quote Answer

9/17/2020 3:18 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/22/2024 Posts: 34442 Rating: (4294)	You can send a email to SIWAREX hotline: hotline.siwarex@siemens.com

Suggestion To thank Quote Answer

10/13/2020 5:22 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/17/2024 Posts: 1166 Rating: (175)	Hello Manev, The WP231 supports Modbus TCP/IP. Therefore, I guess, the WP231 works with LOGO. But I never tried it! You can define the resolution in the WP231 module by yourself, e.g. 1 kg, 0.1 kg, … . Best regards Siwarexi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on