Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo TDE

Created by: Potatis at: 2/9/2017 9:57 AM (25 Replies)

Rating (0)

Thanks 18

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

2/9/2017 9:57 AM	Rate (0)
Potatis Posts: 36 Rating: (0)	I have 2 logos, and i want to see the values from both of my logos on the Logo TDE. Is this possible, if so how? Im new to the Logo TDE. Attachment logo_1_2.png (338 Downloads)
Potatis Posts: 36 Rating: (0)
Suggestion To thank Quote Answer

2/9/2017 10:12 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	A TDE can only be used with one LOGO! communicate. If you want to see message texts from both LOGO!s and if you want to execute the functions, you must - either in the menu of the TDE under LOGO! Selection the IP address of the corresponding LOGO! choose. - or transfer the data of the second LOGO! using VM area to the first LOGO! and create in the first LOGO! the message texts for the second LOGO!e.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Vivek Kansara Potatis

2/9/2017 2:43 PM	Rate (0)
Potatis Posts: 36 Rating: (0)	How do I transfer the data of the second LOGO! using VM area to the first LOGO! And what is easier, using the menu of the TDE or the data transfer of the second logo? And what would you recomend. thanks for the answer btw
Potatis Posts: 36 Rating: (0)
Suggestion To thank Quote Answer

2/9/2017 3:11 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	It's easier to select the corresponding LOGO! in TDE menu. If are the IP addresses of the two LOGO! entered in the LOGO! selection, you only need to select the corresponding IP address.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Potatis

2/10/2017 8:34 AM	Rate (0)
Potatis Posts: 36 Rating: (0)	I have never made a menu before. Do you have any ideas how i should do it? If i want to have 3 menu pages on both of my logos. Logo 1 3 menu pages, logo 2 3 menu pages. And how do i make it so i can modify some values up and down? Attachment menu.png (381 Downloads)
Potatis Posts: 36 Rating: (0)	Last edited by: Potatis at: 2/10/2017 8:34:37 AM
Suggestion To thank Quote Answer

2/10/2017 8:46 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	Here is a possible suggestion. Attachment comfortable_menu_navigation.zip (427 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Vivek Kansara Potatis

2/10/2017 8:57 AM	Rate (0)
Potatis Posts: 36 Rating: (0)	Thank you, can I use the same menu for both logos? And can I change the adjustment value to like, 0.10 sec or something?
Potatis Posts: 36 Rating: (0)	Last edited by: Potatis at: 2/10/2017 9:01:15 AM Last edited by: Potatis at: 2/10/2017 9:01:27 AM
Suggestion To thank Quote Answer

2/10/2017 9:05 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	Potatis Thank you, can I use the same menu for both logos? In one LOGO! for both LOGO!s ? No, the menu needs to be adjusted. It should you only show the way. In every LOGO! separately for itself? Yes.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Potatis

2/10/2017 9:14 AM	Rate (0)
Potatis Posts: 36 Rating: (0)	I mean if I make 2 of those menus, 1 on each logo. Can I just select the ip on the TDE then and it will work?
Potatis Posts: 36 Rating: (0)
Suggestion To thank Quote Answer

2/10/2017 9:28 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	Potatis I mean if I make 2 of those menus, 1 on each logo. Can I just select the ip on the TDE then and it will work? Yes.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Potatis

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on