Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo

Created by: RetroK at: 9/6/2018 8:50 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/6/2018 8:50 AM	Rate (0)
RetroK Bronze Member Joined: 5/1/2013 Last visit: 12/17/2024 Posts: 428 Rating: (4)	6ED1052-1MD08-0BA0 <===LOGO Can I cannect and programming with "USB adaptor"? and Can I programming with Step 7?

Suggestion To thank Quote Answer

9/6/2018 8:57 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/22/2024 Posts: 34442 Rating: (4294)	You must use the LOGO!Soft Comfort Software, Minimum V8.1. The order number is for a LOGO! 8.2. This is a 0BA8. You can not use STEP7 for it, whether TIA or Classic. For program transfer and online monitoring you only need an ethernet cable. The USB adapter was only needed up to 0BA6 if you had no serial port.

Suggestion To thank Quote Answer

9/6/2018 9:04 AM	Rate (0)
RetroK Bronze Member Joined: 5/1/2013 Last visit: 12/17/2024 Posts: 428 Rating: (4)	Thank you and what is 0BA8, 0BA6.?

Suggestion To thank Quote Answer

9/6/2018 9:18 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/22/2024 Posts: 34442 Rating: (4294)	The LOGO! Serie start in the late 90s with the device of the series 0BA0. After that came 0BA1, OBA2 and so on. The current series is the LOGO! 8.2.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on