Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Loop in VBScript

Created by: MorpheusPL at: 10/17/2005 8:04 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

10/17/2005 8:04 AM	Rate (0)
MorpheusPL Posts: 6 Rating: (0)	Hallo I'm using TP270 10" VBScript WinCC flexible 2005 ADVANCED. I want to know if there is a way to create a job - script which would be started every second I noticed that jobs in shcedule can be started only every minute but i need to check some value in plc every second. So I would like to know if this is possible Thanks in advance Bartek Swiatek
MorpheusPL Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

10/26/2005 10:45 AM	Rate (0)
TDS-Peter Posts: 4 Rating: (0)	You could let the PLC generate a bit every second. If you add a script to that bit and let it run on change of the TAG, you'll have a script that runs every second. regards, Peter
TDS-Peter Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

10/26/2005 10:46 AM	Rate (0)
BanteS Posts: 3 Rating: (0)	This is something i also want to know. Has anyone done this?
BanteS Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/31/2005 2:55 PM	Rate (0)
MorpheusPL Posts: 6 Rating: (0)	Hallo I'm using TP270 10" VBScript WinCC flexible 2005 ADVANCED. I want to know if there is a posibility to change a displayed screen using VBScript When I use ex. ActivateScreen("DEVICE_FAULTS", 0) I get some system faults ,,, :( Can anybody help me ... Thanks in advance Bartek Swiatek
MorpheusPL Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

11/2/2005 2:50 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 8/24/2023 Posts: 4099 Rating: (193)	Last question replayed in another topic: VBS ActivateScreen
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on