Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Lost Hardware Key

Created by: Stickman at: 9/22/2009 2:10 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/22/2009 2:10 AM	Rate (0)
Stickman Posts: 18 Rating: (0)	Gents, I have an entire department that runs on TI 505. For many years we used the 505 SoftShop V2.0, but we lost the hardware key some time in February. Since then we have been using TISOFT but that has been getting increasingly difficult. Is there some way to obtain a replacement key, or dongle? Since this area is scheduled for an S7 upgrade, the company doesn't want to invest large sums for the new software. The problem for me is that I have to make the originalladder program available to a vendor for conversion to S7 and I can't even print out the ladder with TISOFT. Any suggestions??
Stickman Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

9/22/2009 2:57 AM	Rate (0)
billwest Posts: 510 Rating: (117)	If you lost the key, you probably lost the serial number for the key so it will be difficult to convince anyone you had a key to replace. I have attached a TISOFT manual. Chapter 14 details printing. If that doesn't work, send me your program and I will print to a PDF and send it back to you. Attachment TS505-8101-7.pdf (821 Downloads)
billwest Posts: 510 Rating: (117)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on