micromaster 440 fault F0001

Hi every body there..

i have micro master 440 connected to plc siemens step 7 through profibus communication. currently i have alarm om plc screen vfd fault and when i checked the vdf its indicate fault F0001 ONCE POWER avaiable on vdf 

i switch off power to reset and fault reset once power on fault become active again 

i follow manual F0001 is over current or earth fault so i remove motor terminal and measure its resistance 6 ohm for three phases identical and with ground r=Mega OHM so no earth

without motor connection and vdf powered fault is active and not able to reset

the vfd has BOP screen so i need to verify the fault reason first? how

secand in case of vfd fauliar  how to copy parametres from old and dowen load it to new vfd?

due to profibus communication will be afftected with replacement like vfd adress ?  or vfd parameters dowenload is enough for adjust communications ?

thanks for ALL..

MOSTAFA .KHODIER

[snip]

The drive is showing F0001, Overcurrent with the motor disconnected at the MM440 drive, this suggests a fault within the drive.

Can you replace the drive with a serviceable item?

I recommend the STARTER software package or an Advanced Keypad to transfer the parameters.

Tractor

Tractor

The drive is showing F0001, Overcurrent with the motor disconnected at the MM440 drive, this suggests a fault within the drive.

Can you replace the drive with a serviceable item?

I recommend the STARTER software package or an Advanced Keypad to transfer the parameters.

Tractor

 Dear Mr, Tractor

thanks for ur kind support as usuall

1-available with us BOP 6SE400-OBP00-0AA0 could you give me procedure for Advanced Keypad to transfer the parameters? how to copy paramters from old and dowenload it to new vfd through BOP 

2-  link to free download the STARTER software package to backup & transfer the parameters.?

thanks 

1/ [snip]

2/ https://support.industry.siemens.com/cs/pd/1508779?pdti=pi&dl=en&lc=en-GB

Tractor

Advanced keypads AOP, may be difficult to find as they have been out of production, also these devices are battery backed, and prone to failure with the battery life.