Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MS FLEXGRID Problems

Created by: matholton at: 5/3/2007 3:27 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/3/2007 3:27 PM	Rate (0)
matholton Posts: 37 Rating: (0)	Hello again :-) I'm having problems with the MS FlexGrid in WinCC. It's an existing system so I don't want to change it too much. My question is this: Is it possible to change the height of certain rows at runtime, programatically? I have a handle to the control (GetObject), so I do ocx->RowHeight(n) = 'value' and nothing happens! Is it a problem with wincc or me? Any ideas? cheers, mat
matholton Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

5/3/2007 6:20 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Or the MS OCX has a problem....these OCX are not systemtested by Siemens... nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/6/2007 9:39 PM	Rate (0)
shaferb Posts: 1 Rating: (0)	its been awhile.. but to do this you will need to loop through the rows and set the heights.
shaferb Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on