Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Need help in upgrading Setup

Created by: MPF at: 3/22/2011 2:55 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/22/2011 2:55 PM	Rate (0)
MPF Posts: 1 Rating: (0)	Hey Guys, i kind of in a dilemma.... curent setup.... Hydraulic Press with S5 Controls setup: 3 Siemens PLC Racks. top rack contains: Beckhoff C1100 (former TRElektronik) 4 Input Cards 3 Output cards 1 Rack communication card Middle Rack Cordinator Card (6ES5 923-3UC4) PLC1 928B (6ES5 928-3UB1) PLC2 928B (6ES5 928-3UB1) Gracis PC (6AV4531-0AC21-0CA0 H1 Bus Card (6GK1143-0AB0) 1 Rack communication card Bottom Rack WF726C (6FM1726-3CA10) WF726C (6FM1726-3CA10) 1 Rack communication card OK now to my problem/more info... The Gracis PC runs of DOS into a selection menu where we run Gracis from. Gracis is installed on FlexOs which is MacOs based. We had one going out the other day and now trying to figure out a setup to replace that PC with a PC sitting in a cabinet. We have a standart H1 Bus which partial is converted with adapters to industrial ethernet. WE have 3 Desktop Pc`s on the Shopfloor which contains Data receipies which the S5PC accessing. they also run of Gracis software but on a Siemens Deaktop. Our Goal is to replace a Rack PC with a desktop which needs to communicate with both PLC`s and the mainserver and H1 Bus anymore question please ask Thanks for the help Michael
MPF Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/25/2013 10:11 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 9/16/2023 Posts: 2683 Rating: (135)	New question splitted to replace Beckhoff C1100 Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on