Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

parameter assignment error "parameter number 9"

Created by: Ton Verra at: 7/14/2014 9:36 PM (2 Replies)

Rating (1)

Thanks 3

3 Entries

7/14/2014 9:36 PM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 9/19/2024 Posts: 727 Rating: (43)	Hi all, Getting the following error: parameter assignment error "parameter number 9" in my diagnostics. See attached pdf for all messages and settings. What am I doing wrong? Attachment F-error.pdf (642 Downloads)

Suggestion To thank Quote Answer

7/15/2014 11:41 AM	Rate (0)
H_a_m_m_y Experienced Member Joined: 8/19/2013 Last visit: 8/26/2024 Posts: 148 Rating: (11)	Hi Ton Verra, your offline and online configuration is different. Please check the f-destination address in your configuration and your module ! they have to be the same Regards

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Ton Verra SnSllvn

7/15/2014 2:34 PM	Rate (1)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 9/19/2024 Posts: 727 Rating: (43)	Hi Hammy, I feel really stupid right now, I had checked my dip switch settings about 20 times... I had adressed them the wrong way (0 to 9)... Thank you so much, and I hope others can learn from my stupid mistakes!

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users fritz

|

Share this page:

Share this page on...

Follow us on