Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Password protection and date on HMI

Created by: Pepito M at: 2/1/2013 7:41 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

2/1/2013 7:41 AM	Rate (0)
Pepito M Experienced Member Joined: 10/25/2010 Last visit: 2/21/2023 Posts: 55 Rating: (1)	Hi! I have Tia portal v11 for S7 1200 1-Can some one explain how to put a password on a buton on a HMI . 2-How can I fix the time and date on the HMI. On the HMI I have the ear 2004 . When I have an alarm the date is 2004. Best regards !

Suggestion To thank Quote Answer

2/3/2013 11:39 PM	Rate (0)
Arm_nz Posts: 19 Rating: (1)	For problem 1: To add a password, setup a user with a password on user administraton page. Then for the secured objects, the user needs to be logged in to operate it, as in 2nd picture. Is this what you mean? Sorry, I have to go, can't write a better explaination. Attachment administrator.JPG (974 Downloads)
Arm_nz Posts: 19 Rating: (1)
Suggestion To thank Quote Answer

2/8/2013 7:53 AM	Rate (0)
Pepito M Experienced Member Joined: 10/25/2010 Last visit: 2/21/2023 Posts: 55 Rating: (1)	If I put Time and date on a HMI KTP 400 it is showin ear 2004 01 01. How can I fix the date and time ?

Suggestion To thank Quote Answer

2/8/2013 8:58 AM	Rate (0)
Pepito M Experienced Member Joined: 10/25/2010 Last visit: 2/21/2023 Posts: 55 Rating: (1)	It is working ! Before I was dooing a mitake and I do not know what . Thanks ! Now I m working to pot the time on a HMI and sincronized with the plc !

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users UMENCHO

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on