Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PC for CPU 948

Created by: ZUMA at: 3/25/2010 2:13 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/25/2010 2:13 AM	Rate (0)
ZUMA Advanced Member Joined: 6/22/2009 Last visit: 7/24/2024 Posts: 44 Rating: (0)	Can I use a laptop to communicate with CPU 948 (6ES5 948 3UA12) forS5 (through USB) so that I can go online and force output and checkDI, DO, AI, AO? What software and communication cable will I use?
	Last edited by: ZUMA at: 3/25/2010 2:15 AM
Suggestion To thank Quote Answer

3/31/2010 3:19 AM	Rate (0)
legacy support Silver Member Joined: 7/15/2008 Last visit: 10/6/2024 Posts: 382 Rating: (44)	Hello Zuma Yes you can use a PC. You need : PC with powered USB interface. (My prefernce is XP as operating System) Latest Version of Step 5. ( Please contact your Siemens Supplier ) USB to S5 AS511 Adapter Cabel including Drivers. P.S :On a Siemens PLC you can only FORCE Outputs while the PLC is in Stop Mode.

Suggestion To thank Quote Answer

4/23/2010 9:33 AM	Rate (0)
kanak_wang Member Joined: 4/16/2010 Last visit: 11/13/2024 Posts: 6 Rating: (0)	you can use the cable 6es5734-1bd20 and step 5 software.

Suggestion To thank Quote Answer

9/5/2014 9:31 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/18/2024 Posts: 4113 Rating: (195)	follow up question published by Ziemensis split to a seperate thread with the subject CPU 948 protocol for communication with the PG Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on