Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PC station Communication with S7 1200 in wincc TIA

Created by: javed88 at: 5/1/2012 6:24 AM (11 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

5/1/2012 6:24 AM	Rate (0)
javed88 Bronze Member Joined: 7/19/2011 Last visit: 3/23/2023 Posts: 262 Rating: (5)	hie I m using wincc TIA advance. i m trying to communicate PC station with S7 1200 . i am doing all settings as per the manual bt still i m mot able to set up the communication. till now i have not install the licence to my pc,wheather the problem is due to this or there is some other reason. kindly guide me
	JAVED AKHTAR
Suggestion To thank Quote Answer

5/1/2012 1:44 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/24/2023 Posts: 4180 Rating: (1332)	javed88 hie I m using wincc TIA advance. i m trying to communicate PC station with S7 1200 . i am doing all settings as per the manual bt still i m mot able to set up the communication. till now i have not install the licence to my pc,wheather the problem is due to this or there is some other reason. kindly guide me Hi, the fault of runtime licenses should not avoid the operation. This is a generall rule by SIMATIC products.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

5/1/2012 1:48 PM	Rate (0)
javed88 Bronze Member Joined: 7/19/2011 Last visit: 3/23/2023 Posts: 262 Rating: (5)	sir can u guide me how to do communication of S7 1200 with pc station
	JAVED AKHTAR
Suggestion To thank Quote Answer

5/1/2012 2:20 PM	Rate (0)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 3/24/2023 Posts: 13205 Rating: (2147)	javed88 hie I m using wincc TIA advance. i m trying to communicate PC station with S7 1200 . i am doing all settings as per the manual bt still i m mot able to set up the communication. till now i have not install the licence to my pc,wheather the problem is due to this or there is some other reason. kindly guide me Maybe I understand, but it seems like you are trying to use the HMI runtime simulator to communicate to an S7-1200 PLC using the WinCC V11 that is part of the TIA Portal basic software package. If that is the case, you need to go to control panel and adjust the pg/pc interface in order for the wincc runtime to know how to connect to the plc. If you do not know the proper setting, you can experiement with the available options one at a time to determine the correct interface, though I suspect you will spot the right one immediately. Please post your results!
	science guy
Suggestion To thank Quote Answer

5/2/2012 7:27 AM	Rate (0)
javed88 Bronze Member Joined: 7/19/2011 Last visit: 3/23/2023 Posts: 262 Rating: (5)	Thanks sir its working only i was not doing proper PG/PC settings . Thanks
	JAVED AKHTAR
Suggestion To thank Quote Answer

12/27/2012 11:43 AM	Rate (0)
G_R_E_Y_31 Bronze Member Joined: 5/26/2011 Last visit: 2/23/2023 Posts: 451 Rating: (7)	huggy_d1 javed88 hie I m using wincc TIA advance. i m trying to communicate PC station with S7 1200 . i am doing all settings as per the manual bt still i m mot able to set up the communication. till now i have not install the licence to my pc,wheather the problem is due to this or there is some other reason. kindly guide me Maybe I understand, but it seems like you are trying to use the HMI runtime simulator to communicate to an S7-1200 PLC using the WinCC V11 that is part of the TIA Portal basic software package. If that is the case, you need to go to control panel and adjust the pg/pc interface in order for the wincc runtime to know how to connect to the plc. If you do not know the proper setting, you can experiement with the available options one at a time to determine the correct interface, though I suspect you will spot the right one immediately. Please post your results! Hi! I have somewhat the same problem. I cannot communicate the RT of my PC to the PLC, but the weird thing is that I'm seeing/monitoring the PLC program/configuration through the same PC, which seems to mean that I have already established the communication between OS PC and PLC. But though, I've tried what huggy_1 advised (thoughbased on what I've described above, I do not suspect the communication) and it did work! So thanks huggy_1! But still, I'm wondering why is that even I have the wrong PC/PG interface, the PC still can monitor/download to and fro the PLC, but not Runtime? Anyways, thanks again!

Suggestion To thank Quote Answer

12/28/2012 10:36 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/24/2023 Posts: 4180 Rating: (1332)	Hi, The Softwares access thecommunication boards / drives on a PCby a "simbolic name" (The "access point of application"). In STEP 7, the simbolic name to access is fixed at S7ONLINE. In others softwares, like WinCC the access name is changeble (so you could use STEP 7 to monitore a PLC by a network and at same time use the WinCC to communicate with other PLC by other network).
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Fazil Cengay

12/30/2012 10:49 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 3/16/2023 Posts: 1498 Rating: (217)	nicer Hi! I have somewhat the same problem. I cannot communicate the RT of my PC to the PLC, but the weird thing is that I'm seeing/monitoring the PLC program/configuration through the same PC, which seems to mean that I have already established the communication between OS PC and PLC. But though, I've tried what huggy_1 advised (thoughbased on what I've described above, I do not suspect the communication) and it did work! So thanks huggy_1! But still, I'm wondering why is that even I have the wrong PC/PG interface, the PC still can monitor/download to and fro the PLC, but not Runtime? Anyways, thanks again! Hello nicer, Have you created an integrated connection or a non-integrated connection at your WinCC RT side? Also is it RT Advanced or RT Professional?? If it is WinCC RT Professional, what is the interface and Access Point you have selected? Is the Set Automatically option check box - selected or unselected??
	Like it? Rate it!
Suggestion To thank Quote Answer

6/26/2018 6:29 PM	Rate (0)
timimi71 Posts: 2 Rating: (0)	Hi I tried to cominicate my PLC CPU 1211C DC/DC/DC / 6ES7 211-1AE31-0XB0 V 3.0.2 with PC station via TIA Portal v13 and WinCC RT advanced, but it doesnt work. when I start the screen with RT it works but not respond when I change tags value. does it becuse the vrsion of PLC? if it is så is there any way to cominicate them? please help me. it works whene I simulate PLC V4 with the PC station, but not with my real PLC 1200 v3.0.2.
timimi71 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

6/27/2018 10:40 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 3/24/2023 Posts: 2797 Rating: (455)	Hello timimi, what about the PG/PC settings in the control panel of your PC? Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jay.

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on