Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PID compact work correctly in PLCsim S7-1200?

Created by: jozjo at: 8/3/2015 8:50 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/3/2015 8:50 AM	Rate (0)
jozjo Experienced Member Joined: 3/11/2009 Last visit: 5/4/2023 Posts: 1 Rating: (0)	Does PID compact controller work correctly in PLCsim S7-1200 ? ---------------------------------------------------------------------------------------------------- Split from TIP: STEP7 V13 SP1 and simulation for S7-1200 V4.0 and higher.
	Last edited by: Min_Moderator at: 8/3/2015 2:45:45 PM New subject after splitting
Suggestion To thank Quote Answer

8/3/2015 9:42 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 5/23/2023 Posts: 13339 Rating: (2181)	What does the PLCsim documentation state about blocks and what they support for the s7-1200? It for sure can only work with V13 SP1 and above, and S7-1200 Firmware 4 devices capable of the latest firmware. jozjo Does PID compact controller work correctly in PLCsim S7-1200 ? ---------------------------------------------------------------------------------------------------- Split from TIP: STEP7 V13 SP1 and simulation for S7-1200 V4.0 and higher.
	science guy
Suggestion To thank Quote Answer

9/14/2015 10:23 AM	Rate (0)
xev2008 Member Joined: 2/12/2009 Last visit: 3/27/2021 Posts: 5 Rating: (0)	Hello, I'm trying to get the PID to work with simulation but without success. I have the V13 Sp1 Upd 4. My software works on real PLC but the same version don't work on simulation. some advices? Thx

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on