Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLC S7_300 don't agree another memory card

Created by: Alpha Tech at: 3/23/2014 5:22 PM (10 Replies)

Rating (0)

Thanks 12

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

3/23/2014 5:22 PM	Rate (0)
Alpha Tech Experienced Member Joined: 6/23/2013 Last visit: 9/6/2024 Posts: 22 Rating: (0)	Hello I have a PLC S7_300 CPU 315 and normal I use with a memory card. When I want to insert another memory card from other CPU to this CPU 315 but CPU don't agree other MMC. I want to know why and how to I Can this CPU 315 agree any MMC Can you helf me this problem ? Thanks Ke

Suggestion To thank Quote Answer

3/23/2014 5:28 PM	Rate (0)
vipz Gold Member Joined: 9/2/2012 Last visit: 8/15/2024 Posts: 711 Rating: (30)	Hai, follow this step if stop led blinking--( resetting procedure of used mmc using cpu of different kind) 1. power on 2. keep mode selector at MRES position as long as stop led is stable(may take 8-10second) 3.once it is stable,put mode selector switch at stop and immediately put back to mres. 4. then stop led will blink with high speed 5.release the mode selector switch 6.aftr this, stop led will be stable, =>mmc got reseted. now download original program.
	With Best Regards VIPZ
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users SolutionFinder Alpha Tech

4/6/2014 6:03 AM	Rate (0)
Tranhieu0983 Bronze Member Joined: 9/24/2010 Last visit: 4/21/2024 Posts: 118 Rating: (10)	Your MMC has problem with another people when they sold to you. You should format MMC to default with their image.
	Mechatronic Center Website: www.plcvietnam.com.vn Email : tvhieu.plc@gmail.com
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Alpha Tech

5/19/2014 2:20 PM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 10/4/2024 Posts: 4515 Rating: (839)	thanhke Hello I have a PLC S7_300 CPU 315 and normal I use with a memory card. When I want to insert another memory card from other CPU to this CPU 315 but CPU don't agree other MMC. I want to know why and how to I Can this CPU 315 agree any MMC Can you helf me this problem ? Thanks Ke Hello, May be the configuration on the other MMC doesn't match that of your PLC. Please try to download the correct HW config and feedback us. Tranhieu0983 Your MMC has problem with another people when they sold to you. You should format MMC to default with their image. If the MMC was formatted, you can not restore it with a guranteed or legalway to its factory status. How do you format or reset an MMC (Micro Memory Card) for SIMATIC S7-300 CPUs? Hope this helps.
	Ayman Elotaify
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users SolutionFinder Alpha Tech

5/19/2014 2:25 PM	Rate (0)
Madhava Silver Member Joined: 11/26/2011 Last visit: 6/29/2023 Posts: 508 Rating: (23)	Reset the memory and download the new program. Your problem will be solved. You can't format the MMC Card. Thats why we have special MMC card supplied by Siemens. Else with a normal memory card you can write the program in it easily. I am not saying its not at all possible. As for as Siemens guys, its not possible for the users...

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Alpha Tech

5/20/2014 7:43 AM	Rate (0)
Alpha Tech Experienced Member Joined: 6/23/2013 Last visit: 9/6/2024 Posts: 22 Rating: (0)	Thanks for all Now I repaired my MMC and my PLC S7_300 agreed this MMC. Thanks Ke

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users SolutionFinder

5/20/2014 9:17 AM	Rate (0)
Madhava Silver Member Joined: 11/26/2011 Last visit: 6/29/2023 Posts: 508 Rating: (23)	Its good.. Your problem is solved...

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Alpha Tech

5/20/2014 11:34 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 9/4/2024 Posts: 4620 Rating: (708)	thanhke Thanks for all Now I repaired my MMC and my PLC S7_300 agreed this MMC. Thanks Ke Hi Ke, Can you tell us how you did it? If you have followed the instructions of our expert Ayman or in some other way?

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users SolutionFinder Alpha Tech

5/21/2014 12:51 AM	Rate (0)
Alpha Tech Experienced Member Joined: 6/23/2013 Last visit: 9/6/2024 Posts: 22 Rating: (0)	Hai, follow this step if stop led blinking--( resetting procedure of used mmc using cpu of different kind) 1. power on 2. keep mode selector at MRES position as long as stop led is stable(may take 8-10second) 3.once it is stable,put mode selector switch at stop and immediately put back to mres. 4. then stop led will blink with high speed 5.release the mode selector switch 6.aftr this, stop led will be stable, =>mmc got reseted. Hello I did steps as above, Can you try ?

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users DS SURESH KUMAR Ste39

5/21/2014 8:18 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 9/4/2024 Posts: 4620 Rating: (708)	Hello me, Ayman was right, You did an overall reset, good Thanks

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on