Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLC-SIM communicating with drives

Created by: Ady at: 8/1/2007 5:37 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/1/2007 5:37 PM	Rate (0)
Ady Posts: 43 Rating: (1)	Hello! I have a problem with the PLC SIM monitor, sometimes it show me some errors about nonexistent address, as is shown in the attachment.... We are using the FC105 from "S5-S7 Converting" from Standard Library, and we renamed it as FC305. This is the second simulation with a S5-S7 Migration, and is the first time that we are addressing drives with the PLC SIM (Simoreg and Masterdrives). As we are doing an actualization from a S5 system to S7, we need to correct the errors in order to look for more.... The question is: how could we eliminate periphery errors like those, in the PLCSIM? Without using the OB121 and 122. I hope I have explained me correctly, Thank you in advanced Attachment Module_Information.JPG (677 Downloads)
Ady Posts: 43 Rating: (1)
Suggestion To thank

8/8/2007 11:24 PM	Rate (0)
Ady Posts: 43 Rating: (1)	Hello!!! Could someone help me, please? Thank you so much. Best regards.
Ady Posts: 43 Rating: (1)
Suggestion To thank

8/10/2007 9:41 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 12/12/2024 Posts: 4114 Rating: (195)	closed cause question posted twice. The second topic with the subject Communication using the FC109 "Write Analog Value 2" is published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on