Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLCSIM Performance (V5.4 SP3->

Created by: bidnetvåga at: 9/28/2010 11:43 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/28/2010 11:43 AM	Rate (0)
bidnetvåga Posts: 6 Rating: (0)	Hi, Are anybody experiencing problems with the performance of the new versions of PLCSIM? XP: - Time interrupt problem when using 10ms cyclic interrupt - No problems with older versions. Need to install OB80 otherwise not possible to run my program. - Response time of tagsin WinCC Flexible runtime veeeery slooow. Vista (even with PLCSIM V5.4 SP2) - Same problem with time interrupt. -Hmi timeupdate problem - Vista does not allow time to be changed.... Kind regards
bidnetvåga Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/25/2011 11:11 AM	Rate (0)
Chilly_Garfield Posts: 316 Rating: (37)	Hi bidnetvåga, I hadn't any problem with this versions, but I use the SP2 and SP3 notso long. How does the mistake make himself visible? But I think the first step youhave to dois, to install SP4. PLCSIMSP4 A interesting link for you: Which components are not supported by S7-PLCSIM V5.4 SP3?
Chilly_Garfield Posts: 316 Rating: (37)
Suggestion To thank Quote Answer

1/25/2011 11:31 AM	Rate (0)
bidnetvåga Posts: 6 Rating: (0)	I am still running PLCSIM V5.4 SP2 due the fact that WinCC Flexible runtime/Simulator is running very slowly in all the later SP's. I already had contact with support without any success The reason is probably multi CPU support in the latter versions.. The reason for the problem with 10ms interrupt is that the base cycle time in the PLCSIM (OB1) without any program at all is about 11ms..... Regards
bidnetvåga Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on