Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Position input module not working

Created by: alwaldner at: 4/24/2016 10:59 PM (7 Replies)

Rating (1)

Thanks 1

8 Entries

4/24/2016 10:59 PM	Rate (0)
alwaldner Posts: 7 Rating: (0)	I have the S7 1500 CPU 1511-1PN with signal modules DI, DO, AI, AO and a Positioning module. Coming from a long time Automationdirect user I am impressed with this control. Everything but the TM-Positioning module work fine. I have a rotary encoder connected to the counter_0 input channel and the A +input led is flashing on the module as I turn the encoder. I have the counter configured and am monitoring it with technology objects in TIA V13. Everything is working but the count stays at 0. What is most likely the problem? Attachment New Bitmap Image.jpg (202 Downloads)
alwaldner Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

4/24/2016 11:02 PM	Rate (0)
Davinator Gold Member Joined: 1/4/2013 Last visit: 12/5/2023 Posts: 1096 Rating: (99)	Can you show also the basic parameters ?
	Searching for Siemens used/new equipments ? Take a look here : https://www.ravettiautomation.com
Suggestion To thank Quote Answer

4/24/2016 11:20 PM	Rate (0)
alwaldner Posts: 7 Rating: (0)	Here is the basic screenshot Attachment basic.jpg (220 Downloads)
alwaldner Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

4/24/2016 11:28 PM	Rate (0)
Davinator Gold Member Joined: 1/4/2013 Last visit: 12/5/2023 Posts: 1096 Rating: (99)	Pretty hard to check everything here since almost all is hwcfg... Try to read this, it is for 1200 but it can fits to your 1500 https://support.industry.siemens.com/tf/ww/en/posts/sample-program-s7-1200-high-speed-counter-hsc/89664/?page=0&pageSize=10
	Searching for Siemens used/new equipments ? Take a look here : https://www.ravettiautomation.com
Suggestion To thank Quote Answer

4/24/2016 11:48 PM	Rate (0)
alwaldner Posts: 7 Rating: (0)	Thanks for the reply. I already spend half a day on his post. Is it possible to setup the counter with SCL instead of using technology objects? Just for testing purposes. I noticed the positioning module has no I/O tags so maybe not...
alwaldner Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

4/25/2016 10:32 AM	Rate (1)
Robster Gold Expert Joined: 5/28/2008 Last visit: 12/1/2023 Posts: 1343 Rating: (140)	Have you done the commissioning with TO object for testing? Have you opened the SW-Gate? Is Diagnostic say something? Otherwise, you can program the counter by your own by using control and checkback interface: https://support.industry.siemens.com/cs/ww/en/view/109475835

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users alwaldner

4/25/2016 7:27 PM	Rate (0)
alwaldner Posts: 7 Rating: (0)	Went away for about an hour, came back and everything worked ...
alwaldner Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

4/26/2016 10:33 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4782 Rating: (123)	New question published by alwaldner is split to a separate thread with the subject SetReferenceValue0 command. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on